Schulte SMR-600, Operator'S Manual, Page: 45 / 76

OPERATION
SMR-600 04/21 Operation Section 4-5
© 2019 Alamo Group Inc.
O
PE
R
AT
IO
N
2.5 Motor
Check with your local Schulte dealer or the factory
to ensure that you have the correct size hydraulic
motor for your make and model of skid steer to
hitch the SMR-600.
Refer to the SMR-600 Parts Manual for skid steer
motor mount.
2.6 Auxiliary Hydraulics
The skid steer must be equipped with Front
Auxiliary Hydraulics. The hydraulic output capacity
of the skid steer must match the equipped
implement drive motor. Reference the skid steer
operator’s manual to determine the hydraulic output
specifications of the skid steer.
2.7 Electrical Controls
This machine is equipped with an electronically controlled valve block. Check to make sure the electrical
harness ordered is the correct one to match your model of skid steer. If the skid steer is not equipped with
electronic joystick controls, or is a type that does not have a harness offered, the machine will be controlled
with the switch box outlined in the assembly section of this manual.
Do not operate this Equipment with hydraulic oil or fuel leaking. Oil
and fuel are explosive and their presence could present a hazard. Do
not check for leaks with your hand! High-pressure oil streams from
breaks in the line could penetrate the skin and cause tissue damage
including gangrene. To check for a hose leak, SHUT the unit ENGINE
OFF and remove all hydraulic pressure. Wear oil impenetrable gloves,
safety glasses and use cardboard to check for evidence of oil leaks. If
you suspect a leak, REMOVE the HOSE and have it tested at a Dealer.
If oil does penetrate the skin, have the injury treated immediately by a
physician knowledgeable and skilled in this procedure.
(SG-15)