Schulte FX-107, Operator'S Manual

Page: 42 / 150

INTRODUCTION
FX-107 07/19 Introduction Section 2-6
© 2019 Alamo Group Inc.
INTRODUCTION
Where legislation allows :
•
The dealer is responsible for any labor charges exceeding a reasonable amount as determined by the
manufacturer
•
The customer is responsible for the transportation costs of the product or parts to the dealer for repair.
•
Ground freight charges for shipping new warrantable replacement parts to the dealer or customer will
be covered by Schulte.
Only ground transportation will qualify for reimbursement.
Conditional Coverage
All Warranty is conditional upon:
•
Care, maintenance and operation in accordance with the manufacturer’s specifications and recommen-
dations (as referred to in the “Operators Manual”) supplied with the product.
•
Submission of the Warranty Registration immediately upon sale of the product.
•
The Pre-Delivery Inspection sheet must be sent with the Warranty Registration. Failure to comply will
result in warranty claims being denied.
Exclusions
This warranty does not extend to:
•
Damage or deterioration after delivery from the manufacturer not attributable to defective material or
workmanship.
•
A Rotary Cutter that has been physically altered without the approval of the manufacturer.
•
Any goods which have sustained damage or deterioration due to encounters with foreign objects for
which the product is not intended, inadequate or faulty assembly, improper or inadequate mainte-
nance, neglect, or abuse.
• Shop supplies such as the use of tools, oil, or grease used in the repair or replacement of a warrantable
part or component.
• Normal wearing parts such as, but are not limited to safety chains, belting, clutch linings, blades and
tire wear.