background image

OPERATION

DHX-360/DHX-600    03/21

Operation Section 4-30

O

PE

R

AT

IO

N

© 2021 Alamo Group Inc.

Never allow children or other persons to ride on the Tractor or Implement.

Falling off can result in serious injury or death.  

(SG-10)

Do not use your hands or feet to clean the disc gangs.   The discs are sharp and serious

injures could result from inadvertent contact with the discs.  Never attempt to stand on the

discs, tires, or frame members of the implement.

    (STL-11)

15. TRANSPORTING THE TRACTOR AND IMPLEMENT

Inherent hazards of operating the tractor and implement and the possibility of accidents are not left behind

when you finish working in an area.  Therefore, the operator must employ good judgement and safe operation

practices  when  transporting  the  tractor  and  implement  between  locations.   By  using good  judgement  and

following  safe  transport  procedures,  the  possibility  of  accidents  while  moving  between  locations  can  be

substantially minimized.  

OPS-U- 0017

Never allow children or other persons to ride on the Tractor or Implement.

Falling off can result in serious injury or death.  

(SG-10)

15.1 Transporting on Public Roadways

Extreme caution should be used when transporting the tractor and implement on public roadways.  The tractor

must be equipped with all required safety warning features including a SMV emblem and flashing warning

lights  to  alert  drivers  of  the  tractor’s  presence.    Remember  that  roadways  are  primarily  designed  for

automotive drivers and most drivers will not be looking out for you, therefore, you must look out for them.

Check your side view  mirrors frequently and remember that  vehicles will approach quickly because of the

tractor’s slower speed.  Be extremely cautious when the piece of equipment that you are towing is wider than

the tractor tire width and/or extends beyond your lane of the road.
Make sure that a proper size safety tow chain is secured between the tractor and implement before entering a

public road.  

OPS-U- 0019

Make certain  that the  “Slow Moving  Vehicle” (SMV) sign is installed in

such a way as to be clearly visible and legible.  When transporting the

Equipment  use  the  Tractor  flashing  warning  lights  and  follow  all  local

traffic regulations. 

(SG-6

)

Summary of Contents for DHX-360



















































































Reviews: