Schulte DHX-360, Operator'S Manual

Page: 41 / 82

ASSEMBLY
DHX-360/DHX-600 03/21 Assembly Section 3-3
© 2019 Alamo Group Inc.
A
SS
EM
B
LY
DEALER ASSEMBLY PREPARATION CHECKLIST FOR DH SCHULTE
NOTE: When unloading unit DO NOT unload from point “B” but from point “A”. Point “B” should only be used
Table 1:
ITEM COMPLETE
1 All Parts are assembled or accounted for
2 The Operator’s Manual is in the manual canister
3 All Safety Warning decals are on the unit, readable and in good
condition
4 The SMV sign is securely attached to the implement
5 The Safety tow chain is properly attached to the implement
tongue
6 The tongue jack is in place on the implement
7 All nuts, bolts and fasteners are properly installed and tightened
to the specified torque
8 All hydraulic fittings are tight
9 No oil leaks are present
10 All cylinders and hoses are filled with oil
11 The hydraulic hoses are routed correctly and do not rub against
sharp edges
12 Electrical connections are secure
13 Implement lights operate properly
14 The tires are properly inflated to the recommended air pressure
(All tires inflated to 58psi on the DH60 and DH36)
15 The wheel lug bolts are tight
16 The tires properly clear implement frame and discs
17 The wheel hub bearings are properly greased
18 All pivot points have been properly lubricated
19 Does the implement paint look complete and acceptable