4
OUTDOOR RADIO REMOTE
OPERATION:
1.
Turn on the Power toggle switch. The red Low Batt light will flash briefly. If it does
not blink at all, the battery is dead. If the carillon is playing automatically, it can be
cancelled by pressing and holding Stop for at least three seconds.
The red Low Batt light will blink when the batteries lose charge. When this occurs,
there will be approximately five hours of remote operation remaining. The battery
should be replaced as soon as possible to ensure proper operation. See Battery
Replacement on the following page for instructions.
2.
Rotate the 16-position selector switch to the function you wish to start. Positions 1
thru 15 have been pre-assigned to specific functions of the carillon. Check the
Function Identification Label on the back of the transmitter for a listing. Position 16
is the Auto Lockout described on the following page, which prevents automatic
operation.
3.
Select the speaker(s) to play by setting the two speaker switches. When the remote is
turned off and the remotely started function finishes playing, the speakers will shut
off. There is no need to set the speaker selection back to normal, since changes made
by a remote are not remembered.
4.
Press and hold the Start button for approximately one second to begin playing the
selected function.
5.
The method of play for the selected function will be as set up in Function Defaults
for your carillon. For instance, if the Counted AutoBell player has been set up to
play 3 songs sequentially, then choosing this function from the remote will cause it to
play 3 songs sequentially. There is no way to change the playing parameters from
the remote.
6.
Once a function has started playing, the Power switch may be turned off. The
function will continue playing until completed, then the carillon will return to the
automatic mode of operation. Since the transmitter is running on battery power, this
will prolong battery life.
7.
To stop a function from playing after it has been started, press and hold the Stop
button for one second.
8.
Remember to turn off the Power switch when finished using the remote or the
carillon will remain in the remote mode of operation, and all automatic playing will
be inhibited.
