16
Remote control user manual
Learning method of remote control:
Power on the receiver, press the (j) key at the emitter at once. The learning is succeed, when
hear double beep ringing from the loudspeaker.
• RF wireless digital transmission technology is adopted to realize the one-to-one control
providing a rate of coincident
NOTICES
1. When the emitter is unable to remotely control the receiver, Please check whether the switch
batteries are in good contact, whether they are fixed properly and whether they run out of use.
2. When the emitter is unable to remotely control the receiver, please check whether there is
other remote control products around the space and check whether the keys are pressed down,
because same nature of remote control product may cause interference with each other resulting
in poor receiving effect. Taking away such articles will normalize the remote control function. (the
infrared remote controller is not included).
3. Too low voltage in battery will lead to failure of the remote controller to work (Please refer to
the product label for the voltage range and related parameters).
4. Please take out the batteries if you will not use this product for a long time.
OPERATING NOTES
1.- The first 24 hours after installation, it is normal to notice a slight noise during fan operation.
After this adjustment period, the rumor will disappear
2.- The light of the fan turned off through the remote control remains in stand-by mode. It will be
completely off if power is cut off through the wall switch.