Then, put the LED ring into position, centred on the underside of the fan body. The magnets will easily attach to the metal.
Next, connect the DRIVER to the circuit using the connection card, and then connect the driver to the wires that come out of the
centre of the underside of the fan body.
Finally, use the magnets to position the driver in the centre. To avoid creating shadows on the light shade,ensure that LEDs are
neither covered by the driver nor the wires. (The position can be adjusted as many times as necessary to find the ideal placement).
7º-Next to the ceiling bracket, connect the module to the wires that come out from the top downrod topside. Then connect the
network cable to the INPUT cables of the module. Once all are connected, insert the module into the reserved space on the ceiling-
mount.
8º- Raise the canopy to the ceiling to cover the ceiling-mount (ensuring the canopy rests on the two bracket screws), rotate the
canopy to ensure the screw heads align with the holes on the bracket, and tighten the screws.
9º- Place the light shade on the underside of the fan body, covering the LED ring. Ensure the grooves on the shade diffuser align
with the pivots on the ring of the fan body, then turn the shade diffuser clockwise until it fixes in place.
