Schuller Ehklar EASY SANDER DS 600, User Manual

Page: 19 / 129

www.schuller.eu
19
For your
GB
Operation / use
● The maschine may be used only if it is perfectly fine. If the maschine or a part of it is defec-
tive, it must be repaired by a professional.
● Always observe the applicable national and international safety, health and labor law pro-
visions.
● Start the maschine only if no errors are found while checking. If a part is defective, it must
necessarily be replaced before the next use.
● Keep the working area clean if you are working.
●
Pay attention to adequate lighting while working with the maschine.
● The immediate area must be free of flammable or explosive materials.
●
Young people under 18 years and users that are not sufficiently familiar with the operation
of the maschine may not use it.
●
Always use the appropriate personal protective equipment (See Personal Protection Equip-
ment).
● Do not overload the maschine. Use the maschine only for purposes for which it is intended.
● Always work with prudence and in good condition: fatigue, illness, alcohol, medicines and
drugs are irresponsible, because you can not use the equipment safely.
● Remove any adjusting key or wrench before turning on the maschine. A wrench or a key that
gets caught in a rotating part of the power tool may result in injuries.
● Do not overestimate yourself. Have a safe position and keep your balance at all times. This
enables better control over the maschine in unexpected situations.
● Wear suitable dressing. Do not wear wide clothing or jewelry. Keep your hair, clothing and
gloves away from moving parts. Wide clothes, jewelry or long hair can get caught in moving
parts.
Maintenance
● Before working with the maschine always pull the plug or remove the battery (voltage free
maschine).
● Only maintenance and troubleshooting the maschine which are described here. All other
works must be carried out by a specialist.
● Periodically check if all fittings are tight.
● Use only original spare parts. Only these parts are designed and suitable for the maschine.
Other spare parts do not only lead to a loss of warranty, they can also endanger you and your
environment.
Storage / Transport
●
Keep always dry the equipment.
● Protect the hole equipment from damage during the transport.