09
3. Installation and operation in the vehicle.
Settings and adjustments to the product or accessories may only be made
by people who have been given the necessary instructions by a medical
product advisor. Please ensure that none of the user's extremities are in
the respective area when making adjustments of any kind to minimise the
risk of injury.
3.1 Back inclination
The required inclination of the backrest can be adjusted through loosening
and removal of the screws (
A
) (observe nut on the inside) and loosening
of the screws (
B
) (on the left and right-hand sides respectively). The back
inclination can be changed in 3° steps from 90° to 108°.
Replace the screws / nuts again after adjustment and check for tight fit.
Ensure that the bottom belt guide is positioned approx. 45° to the pan.
3.2 Headrest/side pelotte pads
After loosening the screw (
C
) the headrest height can be steplessly adjus-
ted. During adjustment, please observe that the head of the child lies at
least 2 cm below the upper edge of the headrest. The position of the side
pelotte pads can be changed after loosening and removal of the three
screws (
D
) within the hole pattern of the back plate.
After each adjustment, please tighten all screws again!
