SC10U
14
5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth
Stereo Device
1. Press and hold the (+) Button or the (-) Button for 10 seconds until
you hear the voice prompt,
“Configuration menu”
.
2. Tap the (+) Button until you hear a voice prompt,
“Phone pairing”
.
3. Search for Bluetooth devices on your mobile phone. Select the
SC10U in the list of the devices detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
5.
The mobile phone confirms that pairing has completed and the
SC10U is ready to use. You will hear a voice prompt,
“Your
headset is paired”
.
6. If the pairing process is not completed within three minutes, the
SC10U will return to stand-by mode.
Note:
1. If a Bluetooth connection between the headset and a mobile phone is
disconnected, press the (+) Button for 3 seconds until you hear a high
tone single beep to recover the Bluetooth connection immediately.
2. If the Bluetooth connection between the headset and a media player is
disconnected, press the (+) Button for 1 second to recover the Bluetooth
connection and play.
5.2 Second Mobile Phone Pairing - Second Mobile
Phone, GPS, and SR10
Typical Bluetooth headsets can connect with only one Bluetooth
device, but a second mobile phone pairing allows the headset to
connect with another Bluetooth device such as a second mobile
phone, an MP3 Player, or the Sena SR10, the Bluetooth adapter.
1.
To enter the voice configuration menu, press and hold the (+)
Button or the (-) Button for 10 seconds until you hear the voice
prompt,
“Configuration menu”
.
2. Tap the (+) Button until you hear a voice prompt,
“Second mobile
phone pairing”
.
3. Search for Bluetooth devices on your mobile phone. Select the
SC10U in the list of the devices detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
5.
The mobile phone confirms that the pairing has completed and
the SC10U is ready to use. You will hear a voice prompt,
“Your
headset is paired”
.