Tachymeter-Funktion:
Der Rand des Zifferblatts verfügt über eine Tachymeterskala, die es ermöglicht, mithilfe der Funktion des
Chronographen, Geschwindigkeitsmessungen in km/h durchzuführen. Starten Sie den Chronographen und halten Sie
ihn an, sobald die gewünschte Geschwindigkeit erreicht worden ist. Auf der Tachymeterskala zeigt der
Sekundenzeiger die Zahl der Einheiten pro Stunde an (240, 200, 180 usw.) . Um die Genauigkeit des Tachymeters zu
garantieren, muss die Maßeinheit exakt erreicht werden. Außerdem darf die gemessene Zeit nicht länger als 1
Minute und nicht kürzer als 15 Sekunden sein.
Setting the date
Pull the crown to the first position. Turn it counter-clockwise until you have reached the appropriate date. It is
strongly recommended that you do not set the day/date between 8 PM and 4 AM, as it can severely affect the
jumping of the day/date at midnight or even damage the
quartz
mechanism.
Setting the time
Pull the crown to the second position. By turning the crown you can set the correct time. While the crown is pulled
to the second position, the second hand does not move, which allows a fully accurate time setting.
Notice: After setting the date and/or the time, it is of utmost importance that you push the crown back against the
case and screw it (clockwise) to ensure that the watch remains water resistant.
Chronograph
functions
To measure any length of time, this
Quartz
Chronograph is set with a total of 3 totalizers. With the help of the
central second hand, one can measure up to 12 hours. To use this model’s chronograph you must unscrew the
buttons found at 2 and 4 o’clock.
Notice: Screw the buttons back down (clockwise) after you are done measuring time to ensure that the watch
remains water resistant.
Button at 2 o’clock
Start-/Stop function
1. Pressing the button once, starts the chronograph.
2. Pressing it again stops it.
3. Pressing it a third time, restarts it.