STARTUP CHECKLIST
•
POWER SUPPLY: Verify that the power you are supplying to the chiller matches
the requirements as stated on the nameplate. Hooking chiller up to the wrong
power supply will damage system components and void the warranty.
•
FILL THE RESERVOIR: Using the fill port on the top of the chiller add water until
the level reaches the red line marked on the sight glass.
DO NOT USE DEIONIZED WATER!!
•
Connect Discharge and Return Piping: Connect your piping to the two female
fitting on the back of the chiller. Rubber Hose, PVC, and copper are acceptable
piping materials. Do not use any ferrous piping material. Doing so will cause
damage to the chiller that is not covered by warranty.
•
Check for proper rotation: (Not applicable for this model)
4
Summary of Contents for 30AC
Page 17: ......
