EZ-sensor PAD Manual
P.12
English
4. Tool overview
4.1 Battery information
4.2. Mechanical Characteristics
4.3. USB Interface
The EZ-sensor Pad is supplied with a USB connector that can be used for charging or
controlling the tool. Most computers have a USB interface.
The USB interface follows an international standard and is compliant with the USB 1.1
specification.
To check if your computer is compatible with this device, refer to the computer owner’s
manual. The USB connector is intended to be used only with a computer. This shall not be
connected to smartphones, tablets, etc.
Battery type
Li-ion/ Li-polymer
Typical charging time
2h
Battery life (full
charge)
Approx. 120 EZ-sen
-
sor programming
operations
Operating temperature
0 - 45°
Storage temperature
-10 - 55°C
Silicon size
1.2 x 7.4 x 2.6 cm
Connector
Micro-USB type B
