Making a phone call (optional)
Receiving a call:
– Ringing tone audible via built-in buzzer
– Receive a call by pressing
the telephone key (6)
– Have conversation and end call by
pressing the telephone key (6) again
Outgoing telephone call:
– Press telephone key (6)
– Dialling tone can be heard
over loudspeaker (2)
– Press the exchange key
(usually the number “0”. Please
check with the staff as necessary)
– dial the required telephone number
using the numeric keypad (13)
– Press OK key (12)
– Have conversation and end call by
pressing the telephone key (6) again
Last number redial:
– Press telephone key (6)
– the last 10 dialled telephone numbers
are indicated on the display (3)
– Selected the required number
with the –/+keys (7) or (8)
– Confirm selection
with OK key (12)
– selected telephone number is dialled
– Have conversation and end
call by pressing the
telephone key (6) again
Volume:
– Use the – key (7) to decrease volume
– Use the +key (8) to increase volume
Finder light/reassurance light
The LEDs (1, 19 and 21) are constantly glow,
thus making them easier to locate even
in the dark.
If the call key (1) is pressed,
then the integrated LED lights up.
Menu functions
Set display brightness:
– Press menu key (11)
– Selection menu appears on the display (3)
– Select “brightness” menu item
using the program selection keys
(9) or (10)
– Press OK key (12)
– Set display brightness
using –/+keys (7) and (8)
– press the menu key (11)
again to leave menu
Set display contrast:
– Press menu key (11)
– Selection menu appears on the display (3)
– Select “contrast” menu item
using the program selection keys
(9) or (10)
– Press OK key (12)
– Set display contrast
using –/+keys (7) and (8)
– press the menu key (11)
again to leave menu
Set basic volume:
– Press menu key (11)
– Selection menu appears on the display (3)
– Select “volume” menu item
using the program selection keys
(9) or (10)
– Press OK key (12)
– Set volume using
–/+keys (7) and (8)
– press the menu key (11)
again to leave menu
Cleaning and Disinfection
For the PAT patient terminal, without exception
only use disinfectants that do not contain
ketones or esters either in part or in full.
For the disinfection process disinfection
by wiping should be used – and under no
circumstances a disinfection by submersion
process.
