14
Read the following instructions carefully before using the regulator and keep them for future
reference. They contain all the necessary information concerning proper use in order to
prevent dangerous situations and damage to the equipment.
The manufacturer disclaims any responsibility for accidents caused by incorrect use of the
regulator, or due to changes made to the same.
Technical speci� cations
Type: C21 2531CT-0220 rev. 00
Input connection: 35 mm, click mechanism (G56)
Output connection: Hose nozzle or thread (H50/51)
Capacity: 1.5 kg/h for butane/propane/any mixture of these (LPG)
Output pressure: 28-30 mbar
EN standard EN16129:2013
Output pressure: 28-30 mbar
Operating temperature: -20-50 °C
Safety measures
• The regulator is designed for use with propane/butane/any mixture of these gases.
• If the regulator is to be used outdoors, it must be positioned or protected in such a way
that no water can penetrate into it.
• Do not move the gas bottle during use.
• In addition, national and local standards and regulations must be complied with.
• Make sure that all the valves and nozzles are closed during � tting and after use.
• Only use LP gas bottles in an upright position.
• Make sure that the � exible gas hose � tted is in good condition and no more than 3 years
old.
Use
Follow the instructions and diagrams at the end of these instructions.
The gas connection must only be removed or � tted outdoors in a well-ventilated location and
at a good distance from � ammable liquids and materials, and heat sources (� ames, embers,
cigarettes, electrical installations, etc.) and people and animals.
The regulator must not be used if it is damaged.
GAS REGULATOR WITH HOSE
