1
IMPORTANT SAFETY NOTICE
Risk of property damage, death, or serious injury may result if
buried pipes and cables are not properly located before digging.
Read and follow all instructions and warnings in this user guide
before using the Loki receiver and transmitter.
Regularly check your Loki receiver and transmitter, in all modes,
over a cable that gives a response you are familiar with.
Some power cables DO NOT radiate detectable power signals.
Power signals may not be present. It is advisable to use the
transmitter whenever searching for pipes and cables.
Do not use the Loki receiver depth estimation function to decide if
mechanical digging over a buried pipe/cable is appropriate.
Shallow
Alert™
may not activate, even if a live power cable is
present.
Keep mobile phones away from cable and pipe locators when in
operation. Minimum distance 24”/60cm is recommended.
The Loki receiver cannot indicate whether a signal comes from a
single pipe/cable or from several cables or pipes bundled or buried
in close proximity to each other.
It is recommended that the Loki receiver and transmitter are
serviced at least once a year and have their calibration validated
using Schonstedt approved test equipment. Schonstedt will accept
no responsibility for repairs carried out by unauthorized repairers.
Even if using a Loki receiver and transmitter, ALWAYS DIG WITH
CAUTION.
Call 1-800-999-8280 for questions regarding the proper use, maintenance,
and repair of the Loki receiver and transmitter.
