13
Making the waterline
connections
□
Thread the nut (1) on the supply line onto the
outlet of the water supply valve (2) and tighten
with a wrench. Do not overtighten.
10
Installation (continued)
2
1
H
C
Hot
14
Remove the quick connector
□
If it is necessary to remove the quick connector
(1), squeeze the tabs (2) on the quick connector
and then pull down to disconnect.
12
Installing the weights
□
Install the weight clip (L) at the point of the hose (K) marking “weights here”.
□
Insert the weights (M) onto the clip (L) by sliding it down onto the clip (L).
M
L
K
Weights
here
Weights
here
Squeeze
2
Pull
down
1
1