18
EN
Setting a delayed start on a wash cycle
When you have loaded the dishes, you can choose when
to start your dishwasher before setting the wash cycle
desired.
l
Press button "
D
" and you can delay the start of the
wash cycle by 24 to 1 hour. Press the button once, a beep
will sound and the wording "24 h" will come up on the
display. Then, each time you press the button a beep will
sound and the hours will decrease by one hour until the delay
is 01 h. If you press the button once again, the delayed start
is reset and 3 dashes appear on the display.
Note: the delayed start is also reset automatically should you
fail to select the wash cycle on knob "
M
" within 15 seconds.
l
Once you have set the delayed start time, select the
wash cycle on the knob: after the beep sounds, you will see
indicator light "
H
" flash on the display and the countdown
begins (indicated on the display one hour at a time). A quick
look at the indicator lights will keep you informed of the
countdown progress at all times.
Have you changed your mind?
w
During the countdown, you can modify the delay by
pressing button "
D
" repeatedly without resetting the
wash cycle.
w
If you have changed your mind and wish to start the
wash cycle immediately, press button "
D
" until the
countdown is fully reset. Indicator light "
H
" will turn off
and the cycle will start at the sound of a beep.
The indicator light corresponding to the cycle phase under
way will come up on the display and the countdown to the
estimated cycle end begins.
Warning
If opening the door soon after the end of the programme,or
during it, stand away from the Dishwasher, to avoid possible
injury from hot steam.
