EN
18
Start-up and use
*
Only available in selected models.
Measuring out the detergent
A good wash result also depends on the correct amount of
detergent being used; exceeding the stated amount does
not result in a more effective wash and increases
environmental pollution.
Only use detergent which has been specifically
designed for dishwashers.
DO NOT USE washing up liquid.
Using excessive detergent may result in foam residue
remaining in the machine after the cycle has ended.
The use of tablets is only recommended for models
which offer the MULTI-FUNCTIONAL TABLETS option.
To achieve the best results from each washing and
drying cycle, powder detergent, rinse aid liquid and salt
should be used.
Compartment A:
Washing detergent
Compartment B:
Pre-wash detergent
1. Open cover C by pressing button
D.
2. Pour in the detergent after
consulting the
Table of wash cycles
:
For powder detergent use
compartments A and B.
For detergent in tablet form: when
the cycle requires 1 tablet, place it in compartment A and close
the cover; when it requires 2, place the second tablet at the
bottom of the appliance.
3. Remove detergent residues from the edges of the
compartment and close the cover until it clicks.
A
B
D
C
Switching the appliance on for the first
time
Selecting the language
Press the ON/OFF symbol; you will hear a short beep and the
display will show the list of available languages.
Scroll through the options using the UP/DOWN arrows until
you reach the desired language and press OK to confirm the
selection.
Every time the dishwasher is switched on subsequently, the
list of programmes will be displayed.
The language can also be changed at any time by pressing
the P symbol three times.
After selecting the language you may choose whether to acti-
vate or deactivate the SOUND. Press the OK (yes) or OK (no)
symbol to confirm the selection.
If you select and confirm EXIT, or if you press the P symbol,
you will be taken straight to the list of washing programmes.
Starting the dishwasher
1.Turn the water tap on.
2.Open the door and load the racks (see Loading the Racks).
3.Measure out the detergent (see adjacent figure) and close the
door.
4.Press the ON/OFF symbol; the display will light up and show
the list of available programmes.
5.Use the UP/DOWN arrows to select the desired programme
according to the type of crockery loaded and its level of soiling
(see Table of Programmes).
6.Press OK to confirm the selection.
7.If you do not wish to select any of the available options (see
Washing Options*), press the START/PAUSE symbol; a short
beep followed by a longer beep will mark the start of the pro-
gramme and the display will show four rectangles. The full rec-
tangles represent the stages which will be implemented during
this wash:
Pre-wash, Wash, Rinse, or Drying.
8.At the end of the wash programme you will hear 2 short
beeps followed by a longer beep, and the text CYCLE ENDED
will appear on the display.
9.Switch off the appliance by pressing the ON/OFF symbol and
shut off the water tap.
10.Open the door and wait for a few minutes before removing
the crockery inside, in order to avoid burns.
Unload the racks, beginning with the lower level.
- The machine will switch off automatically during
certain periods of inactivity, in order to minimise electricity
consumption.
AUTO WASH CYCLES
*
:
this model of dishwasher is
equipped with a special sensor which can be used to assess
the level of soiling and automatically select the most efficient
and economic wash cycle accordingly.
The duration of the auto wash cycles may vary due to the
operation of the sensor.
Modifying a wash cycle in progress
If a mistake was made during the wash cycle selection process
it is possible to change the cycle, provided that it has only just
begun.
To change the cycle after the wash cycle has started,
switch the machine off and on again using the ON/OFF symbol
and select the desired wash programme and options.
Adding extra crockery
Press the START/PAUSE symbol; you will hear a short beep
and the text CYCLE PAUSED will appear on the display. Open
the door, taking care to avoid the escaping steam, and place
the crockery inside the dishwasher.
Press the START/PAUSE symbol: the cycle will restart after a
prolonged beep is emitted.
If the START/PAUSE symbol is pressed the wash pro-
gramme or the Delayed Start function (if selected) is inter-
rupted.
At this stage it is not possible to change the programme.
Accidental interruptions
If the door is opened during the wash cycle, or if there is a
power cut, the wash programme or Delayed Start option (if se-
lected) is interrupted. When the door is opened, the text
CY-
CLE PAUSED
appears on the display, alternating with the text
CLOSE DOOR TO RESTART.
If there is a power cut the display switches off.
The wash cycle will restart as soon as the power returns.
