SCHNIER 810487, Operating Manual

Page: 4 / 10

Operating manual 810487-BAL-EN-220511 Status 11.05.2022 Page 4 von 10
1.4.
Warranty
The warranty is 24 months after delivery.
Any kind of warranty expires if the device has been opened, modified, parts have been
replaced with non-original parts or these operating instructions have not been observed.
1.5.
Manufacturer
SCHNIER Elektrostatik GmbH
Bayernstr. 13
72768 Reutlingen
Deutschland
Fon: +49 (0) 71 21 / 90 973 -60
Fax: +49 (0) 71 21 / 90 973 -99
www.schnier.de
www.schnier-flock.de
mail@schnier.de
Head office: Reutlingen HRB 354 531
USt.-IdNr.: DE 146 481 986
Managing Director: Olav Schnier
2. Guide to these operating instructions
These operating instructions must be read, understood and observed in all points by all
persons who are responsible for the equipment. Only with knowledge of these operating
instructions can errors be avoided and safe and trouble-free operation be ensured.
SCHNIER Elektrostatik GmbH does not accept any liability for damage resulting from non-
observance of these operating instructions!
3. Intended use
This instrument is intended for use only as a microscope for checking your flock fibers.
ATTENTION!
Any commissioning outside this provision is prohibited.
3.1.
Further notes on hazard prevention
Danger:
Direct contact
Hazard description:
When troubleshooting the open device, contact with electricity may occur