Instructions for Use SS 20.261
Page 3
1 Important information
The instructions for use contain all required information for a fast
commissioning and a safe operation of the
SCHMIDT
®
Flow sensor
SS 20.261
:
These instructions for use must be read completely and observed
carefully, before putting the unit into operation.
Any claims under the manufacturer's liability for damage resulting
from non-observance or non-compliance with these instructions will
become void.
Tampering with the device in any way whatsoever - with the
exception of the designated use and the operations described in
these instructions for use - will forfeit any warranty and exclude any
liability.
The unit is designed exclusively for the use described below (see
chapter 2
). In particular, it is not designed for direct or indirect
personal protection.
SCHMIDT Technology
cannot give any warranty as to its suitability
for a certain purpose and cannot be held liable for accidental or
sequential damage in connection with the delivery, performance or
use of this unit.
Symbols used in this manual
The symbols used in this manual are explained in the following section.
!
Danger warnings and safety instructions
– read them
carefully!
Non-observance of these instructions may lead to injury of
personnel or malfunction of the device.
General note
All dimensions are indicated in mm.
