Quick Start Guide – Press Control 3000 – 300 Series Manual Press
PRC3000ManPressQuickStart.doc
Page 4 of 4
July 2009
Sample setup parameters:
Press to a distance
1. Press D-In Key
2. Line 0 – set to 1 (for stroke – mode)
3. Line 1 – set to 100 N
4. Line 2 – set to 30 mm (press ENTER, enter value, press ENTER)
5. Cycle press without a part in fixture
Press to a force
1. Press D-In Key
2. Line 0 – set to 0 (for force – mode)
3. Line 1 – set to desired press force. Once reached, ram will return
4. Line 2 – enter value greater than required ram travel
5.
Cycle press with a part in fixture or something to press against