Schmidt DHT-2, Operating Instructions Manual

Page: 6 / 16

6
2.4 Unpacking
Unpack the moisture meter and inspect it for any shipping damage.
Notices of defect must be filed immediately, in writing, at the latest within 10 days on
receipt of the goods.
3 Operation
3.1 Notes Before Starting Measurement
Have you read and understood the Operating Instructions, in particular
Chapter 1 “Basic Safety Notices”? You are not permitted to operate the
moisture meter before doing so.
Before working with the instrument you must put on your personal protective
clothing, if necessary. For example, eye protectors, gloves, etc.
3.2 Operating Elements
3.3 Battery Insertion and Replacement
The moisture meter is delivered with a 9V E block battery inserted.
If “Low Battery” is indicated on the DISPLAY, the battery must be replaced immediately.
Operating the instrument with a low battery may cause measurement errors.
To insert the new battery:
- Open the BATTERY COMPARTMENT on the rear side
of the instrument.
- Insert a 9V battery (E block) into the
BATTERY COMPARTMENT.
Please ensure proper polarity.
- Close the BATTERY COMPARTMENT.
Used batteries must be disposed of in compliance with local regulations.
If the instrument will not be used for a longer period of time, the battery
should be removed.
DISPLAY
UP key
DOWN key
BNC CONNECTOR
PS2 CONNECTOR
fig. 3.2