04
04 English
04 English
31
30
HYDRO SILK system
System description
Operation of the Schmidlin HYDRO SILK system has deliberately been kept
very easy. The functions are operated by a round button on the inside of the
bathtub.
HYDRO SILK
Water-Air-System
Operation HYDRO SILK
The status display (LED – light-emitting diode) above the function key «HYDRO
SILK» flashes for 0.5 seconds every second when the controller is connected
to the mains (= mains voltage present).
The button has only one control key (HYDRO SILK only). Each fitted option
has its own round button on the inside of the bathtub.
Important
Never operate the HYDRO SILK system without water! The pump could
suffer permanent damage if run dry for only a few minutes.
Only switch the HYDRO SILK system on when the water level is 5 cm
above the neck jet.
The HYDRO SILK system is switched off automatically after 20 minutes.
The automatic cut-out is a safety function against accidental operation
of the system.
Press once: switch on the HYDRO SILK system
Press twice: switch off the HYDRO SILK system