Spotlight (optional)
The status display (LED – light-emitting diode) for the function key «Spotlight»
flashes for 0.5 seconds every 8 seconds when the controller is connected to
the mains (= mains voltage present).
Temperature display (optional)
04 English
40
The temperature display is activated automatically as
soon as the water reaches the sensor. The sensor is
located in the lower part of the bathtub on the inside.
Important
If a spotlight has been fitted the whirl system is protected against dry
running (TLS) since the spotlight may only be operated when the tub is
full. The spotlight is cooled by the water in the tub so that the seal does
not overheat. The spotlight can be activated once the water in the tub
reaches the TLS sensor (located above the spotlight).
The spotlight is switched off automatically after 20 minutes. The auto
-
matic cut-out is a safety function against accidental operation and pos-
sible overheating.
Press once
switches on the spotlight
Press twice
switches off the spotlight
