EFA cutters Translation of the original operating instructions-
EN
Rev.00
– 05.2020
13 of 26
4.
Transport and storage
The machine has been tested and carefully checked in our factory before shipment.
The test ensures that the machine is working properly.
Despite all care taken, there is a possibility that the machine could be damaged during transport.
Therefore, check the machine for possible transport damage when unpacking it.
Unpacking the machine
Warning
!
Safety instruction!
Do not remove the cutting edge guard until just before start-up.
Remove all packaging materials and dispose of them in a professional and environmentally friendly manner.
Check the machine for possible transport damage.
Information on
disposal and recycling
can be found in
section 9
.
Storage of the machine
Warning
!
Safety instruction!
Do not remove the cutting edge guard until just before start-up.
For safe storage of the machine, it is essential to observe the following instructions:
– Only store the machine in a dry, ventilated room.
– Only store the machine in a dry condition.
– Protect the machine from corrosion.