background image

8

EN

RSS36AS-E-EN

Operating instructions

Safety sensor

RSS36-AS

The currently valid declaration of conformity can be  

downloaded from the internet at www.schmersal.net.

Place and date of issue:

Wuppertal, May 26, 2017

Authorised signature

Philip Schmersal

Managing Director

EU Declaration of conformity

Original

K.A. Schmersal GmbH & Co. KG

Möddinghofe 30

42279 Wuppertal

Germany

Internet: www.schmersal.com

We hereby certify that the hereafter described components both in their basic design and construction conform 

to the applicable European Directives. 

Name of the component:

RSS36-AS

Type:

See ordering code

Description of the component:

Non-contact safety sensor with  

integrated AS-i Safety at Work

Relevant Directives:

Machinery Directive

RED-Directive

RoHS-Directive

2006/42/EC

2014/53/EU

2011/65/EU

Applied standards:

EN 60947-5-3:2013,

EN 300 330 V2.1.1:2017,

EN ISO 14119:2013,

EN ISO 13849-1:2015,

EN 61508 parts 1-7:2010,

EN 62061:2005 + AC:2010 + A1:2013 + A2:2015

Notified body for the prototype test:

TÜV Rheinland Industrie Service GmbH

Alboinstr. 56, 12103 Berlin

ID n°: 0035

EC-prototype test certificate:

01/205/5115.01/15

Person authorised for the compilation  

of the technical documentation:

Oliver Wacker

Möddinghofe 30

42279 Wuppertal

9.  EU Declaration of conformity

K. A. Schmersal GmbH & Co. KG

Möddinghofe 30, D - 42279 Wuppertal

Postfach 24 02 63, D - 42232 Wuppertal 

Phone:  +49 - (0)2 02 - 64 74 - 0 

Telefax:  +49 - (0)2 02 - 64 74 - 1 00

E-Mail: [email protected]

Internet: http://www.schmersal.com

Summary of Contents for RSS36-AS









Reviews: