schmersal PROTECT-PSC Instruction Manual Download Page 53

Page: 53 / 267

System description

Instruction Manual PROTECT-PSC
V 2.6R01 / 04.19

–21

3.4

PROTECT-PSC operating modes

3.4.1

Overview

3.4.2

Operating mode 0

Devices are in the delivered state and are not ready for operation. All outputs are in
safe state.

3.4.3

Operating mode 1

Operation mode 1 cannot be used from firmware version 2.00 or later of
CPU(MON) and CPU OP(MON).

3.4.4

Operating mode 2

This mode is not currently realised.

3.4.5

Operating mode 3

Mode 3 is the mode for free programming.

It is possible to create a safe (PS) and an operational program (PN). These pro-
grams can be created in accordance with the user’s specifications.

Programming is based on the ladder diagrams and function blocks in accordance
with IEC 61131. Programming with max. flexibility is possible in mode 3.

In addition the operational functions are possible by using the operational in-
puts/outputs.

Summary of Contents for PROTECT-PSC












































































































































































































































































Search results

Summary of Contents for PROTECT-PSC

Reviews:

Related manuals for PROTECT-PSC

Brands by name

Popular brands

schmersal PROTECT-PSC, Instruction Manual

Search results

Summary of Contents for PROTECT-PSC

Reviews:

Related manuals for PROTECT-PSC

Brands by name

Popular brands