12
Operating instructions
Solenoid interlock
AZM 415-../..
EN
Fault exclusion with regard to wiring routing must be
observed.
If for a certain application the quiescent current version of a
solenoid interlock cannot be used, for this exception an interlock
with power to lock can be used if additional safety measure
need to be realised that have an equivalent safety level.
3. Mounting
3.1 General mounting instructions
Four mounting holes are provided for fitting the solenoid interlock. The
solenoid interlock must not be used as an end stop. Any mounting
position. The mounting position however must be chosen so that the
ingress of dirt and soiling in the used opening is avoided. A smooth
insertion of the actuator in the enclosure must be ensured.
Mounting of the actuator
See actuator mounting instructions.
Please observe the relevant requirements of the standards
ISO 12100, ISO 14119 and ISO 14120.
The actuator must be permanently fitted to the safety guards
and protected against displacement by suitable measures
(tamperproof screws, gluing, drilling of the screw heads).
3.2 Dimensions
All measurements in mm.
29,5
88
M20x1,5/ST
M20x1,5/STR
46,5
8,6
¤
6,5
¤
11
130
114
A
100
24,7
84
28
23,5
M23x1
AZM 415-../..ZPKF
AZM 415-../..ZPKFE
21
25
30
22
27
AZM 415-../..XPKRS
30
25,6
55
,2
55
,2
ø
20
AZM 415-../..XPKNS
25
7
25,6
55
,2
55
,2
ø
20
AZM 415-../..ZPKT
22
25,6
55,2
55,2
26
AZM 415-../..ZPKTE
100
46,5
18,5
24
15
44,8
55,2
130
42
