3. Carefully lever the two plastic pistons out of the
holes in the housing using a small screwdriver.
4. Clean the boreholes with a lint-free cloth.
5. Grease the piston seals of the new piston rods (f)
and the guide bushes (1) with pneumatic grease
.
Insert the piston rods (f) in the guide bushes (1) in
the correct position
.
f) Piston rod part no. 10.02.02.04075
To determine the amount of grease required, fol-
low the instructions in the illustration.
2
1
f)
f)
1
1
6. Insert pressure springs and seals.
g) Compression springs part no. 20.08.02.00375
i) Sealing washer part no. 10.02.02.04079
h) Sealing frame part no. 10.02.02.04007
EN-US · 30.30.01.00962 · 01 · 01/22
7 / 9
