Schmalz SCPi, Brief Operating Instructions

Page: 25 / 68

S
CHMALZ
SCP
I
/ SMP
I
GB - 11
Setting of switching points for the signal output with [H-2] and [h-2]
The activation value
[H-2]
(when configuring the
[no]
output) and hysteresis
[h-2]
of the
parts control signal output are set using this function.
When the
[H-2]
value is reached or exceeded, then the H2 LED is also switched on.
The switching points of the parts control signal output are set as follows:

Press the button.

Enter a valid PIN if the menu is locked.

Select the desired
[H-2]
or
[h-2]
parameter using the or buttons.

Confirm by pressing the button.

Change the value using the or buttons.

Press the button to save the changed value.
The display automatically jumps to the next setting value.

When the or button is pressed for approx. 3 seconds, the value to be
changed is scrolled through quickly.

The value is not accepted when exited using the button.

Changes to the configuration of the
[no]
or
[nc]
signal output are made in the
configuration menu.