EndoPilot²
- 4 -
ReFlex Calibration
For the use of the ReFlex movement (Procodile files) an additional calibration is necessary,
if your device was manufactured in 2018 (see sticker on the back of the control unit).
The prerequisite is that a software update has been carried out beforehand and that the
software version of your device is at least: v4.196.
Calibration with dongle:
1. Switch off your device
2. Insert the dongle into the blue socket on the right side (motor connection)
3. Switch on your device - the calibration is done automatically
4. Check
:
•
Leave the dongle inserted.
•
Select the "Service" menu (gear symbol at the top left
of the start screen)
•
Select "Service Information" below.
•
In the Motor line you will find the following values on the
far right: RF_L: 60 (+/-2) and RF_R:60 (+/-2) Note: If the
dongle is removed, other values may be displayed
If not calibrated, the values appear in red.
Schlumbohm
GmbH & Co. KG
Phone: +49-4324 - 8929 - 0
Klein Floyen 8-10
Telefax: +49-4324 - 8929 - 29
D-24616 Brokstedt
Germany
