1. General
12 | 268
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
Inadequate control of parts which are subject to wear.
Improperly executed repairs.
1.8
WARRANTY STATEMENTS AND POLICIES
See Schleuniger document:
"General Conditions of Sale and Delivery"
.
1.9
COPYRIGHT PROTECTION
Keep this Operating Manual confidential. It is intended for the exclusive use of persons oper-
ating the product. Without written permission of the manufacturer, this manual shall not be
made available to third parties.
The content of the Operating Manual in the form of text, illustrations, drawings, circuit dia-
grams or other presentations, is protected by copyright law of the manufacturer.
The same applies to copying, saving or distribution with electronic media.
1.9.1
Trademarks
Windows®Windows® (XP, Vista, 7, 8, 10 or CE) are registered brands of Microsoft Corporation
in USA and other countries.
All other brands or product names are trademarks or registered trademarks of their owners.
Registered trademarks are not specially marked in these instructions. However, this does not
mean that they can be used freely.
1.10
SPARE PARTS
Always obtain original spare parts from your local Schleuniger distributor.
CAUTION
Use of unverified spare parts!
Unverified or defective spare parts may lead to damage, malfunc-
tion or complete failure of the product.
Unverified or defective spare parts may impair the safety of the
operating personnel.
The following instructions are to be followed!
Only use original spare parts from Schleuniger.
Any modifications in design or function of the spare parts, in terms of ongoing product
improvement, are subject to change without prior notification.
1.11
MISUSE AND MODIFICATIONS
Do not make any modifications to the machine or processing station and only utilize it for
the intended use.
See also chapter
"2.4 Intended usage of product (Page 19)"
.
In particular please note:
Modifications lead to the loss of the guarantee by the manufacturer.