manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 19 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 19

2. Safety

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

19 | 268

2.4

INTENDED USAGE OF PRODUCT

WARNING

Caution, risk of injury, property damage!

Only use the product according to its intended use. It is designed and

manufactured exclusively for the following intended application!
The 

CrimpCenter 64 SP

 is an expandable fully automatic crimping

machine with up to four processing stations, depending on the config-

uration.
According to the respective technical data, the 

CrimpCenter 64 SP

 is

suitable for the following purposes of the wire processing:

Cut to length
Stripping
Crimping (one or two sides)
Doubling crimp
Wire printing (Inkjet)
Coax cable processing
Good / bad part sorting
Wire stacking
Compacting
Sealing
Twisting
Tinning

For further details see chapter 

"5  Product description (Page  36)"

.

For better protection of the operator, the processing can be stopped at

any time.

The following instructions are to be followed!

The 

CrimpCenter 64 SP

 is to be operated according to its intended

use and only with the processing stations and options as described

in this manual.

Schleuniger

 accepts no responsibilities for consequences resulting from

improper use.
Any modification requires the written consent of the 

Schleuniger

GmbH.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments