Commissioning
84
Operating Manual XCA 1100 / XCA 1200
●
Version 12/17
In most cases the ESI file should already exist. Should the files not be available
you will have to go through the following steps. You can add the file through ESI-
Management window (see: Figure 84). The ESI data is prepared from the slave
module manufacturer.
Figure 84:
EC-Engineer
ESI-
Verwaltung
In the menu <File> and <ESI-Management> are shown the existing ESI files
(see: Figure 85). To add a new file click on <add File>.
Figure 85:
EC-Engineer
ESI file list