Schlage BE468 series, User Manual, Page: 5 / 36

5
English
CLeANINg tHe LoCk
In order to properly clean the touchscreen from build-up of dirt, oils, or other contaminates; you should use a mild dish soap with warm water
and follow the general rules below:
•
Do rinse the touchscreen with warm water prior to cleaning process.
•
Do follow the application of soap with a damp, lukewarm cloth.
•
Don’t use abrasives, high alkaline cleaners, or gasoline.
•
Don’t leave cleaners on touchscreen for long periods, wash immediately.
•
Don’t apply cleaners in direct sunlight or at elevated temperatures.
•
Don’t use scrapers, squeegees or razors.
The bolt itself can be cleaned, using a mild dish soap and warm water. This can help improve decreased performance.
PRogRAmmINg tHe touCHSCReeN
Red X
•
If there is a problem during
programming, you will see
the red error X.
Programming Indicator
•
Blinks when Programming
Mode is entered.
•
Solid while a programming
function is being performed.
Green Check Mark
•
Blinks when a number
key is pressed and
when a function is
complete.
Schlage Button
•
The first button you will press
in the programming process.
•
Can also be pressed to exit
programming immediately.
tips for Successful Programming
»
The lock comes preset with a unique default Programming Code
and two unique Default User Codes. Use these codes to operate
your lock or change them using the instructions in this guide.
»
Default Codes are located on the back of the Interior Assembly.
Programming Descriptions
Add User Code User Codes unlock the deadbolt. Can be 4 - 8 digits long. All codes must be the same length. See Change User
Code Length on page 6.
Delete User Code Removes one User Code at a time.
Change Programming Code
The Programming Code is used to put the lock into Programming Mode. It is 6 digits long.
Enable Vacation Mode Prevents all user codes from unlocking the deadbolt. Enable for extra security while you are away for an extended
period of time.
Disable Vacation Mode Returns lock to normal operation.
Enable/Disable Beeper
The beeper can be turned off if desired. Beeps will still sound during programming.
Delete ALL User Codes Removes ALL User Codes from the lock.
Enable/Disable Lock & Leave When enabled: Press the Schlage Button to lock the deadbolt. (Default setting).
When disabled: Press the Schlage Button and then enter a user code to lock the deadbolt.
Change User Code Length User Codes can be 4 - 8 digits in length. Default is 4 digits. Changing the User Code length will delete all
existing User Codes!
Enable/Disable Auto-Lock When enabled, the lock will automatically relock 30 seconds after unlocking. (Disabled by default.)
Temporarily Disable Auto-
Lock
Auto-Lock must already be enabled. While the deadbolt is locked, press the Schlage Button and then enter a
4-8 digit User Code to unlock the deadbolt. Within 5 seconds, manually lock and unlock the deadbolt using the
thumbturn.
Restore Auto-Lock Lock the deadbolt using the thumbturn.