© Allegion 2014
Printed in U.S.A.
P513-174 Rev. 01/14-e
3c Install latch with provided screws.
4
Prepare door jamb.
4a Locate exact centerline of latch and mark centerline on
door jamb.
Mark drill points
Z\v
”
(6 mm) above and below horizontal
centerline. Drill two (2) overlapping
M\,
”
(22 mm) holes,
ZZ\zn
”
(17 mm) deep.
Clean out holes for strike box. Use strike as pattern for
cutout. Use chisel to remove wood
Z\v
”
(6 mm) deep.
4b Mark and drill
C\zn
”
(4 mm) pilot holes for 3
”
wood
screws.
Install reinforcer, dust box, and strike with provided screws.
5
Install cylinder.
5a Insert driver bar into cylinder.
5b With key removed, insert cylinder into rings (See Step
1) and guide driver bar into slot in latch.
Screw mounting screws from thumbturn through the inside
cylinder and tighten evenly.
Z\v
”
(6 mm) deep
M\,
”
(22 mm) Hole
ZZ\zn
”
(17 mm) deep
Z\v
”
(6 mm)
Customer Service
1-877-671-7011
www.allegion.com/us