Schiller Steiner 75-71234A Assembly Instructions Manual Download Page 4

2

MODEL NUMBER:

  This number appears on 

sales literature, technical manuals and price lists.

SERIAL NUMBER: 

 This number appears only 

on your model. It contains the model number 

followed consecutively by the serial number.  

Use this number when ordering parts or seeking 

warranty information.

Located on engine deck top, left side.

SAFETY

NOTICE !!!

Unauthorized modifications may present 

extreme

 

safety hazards to operators and bystanders and 

could also result in product damage.  

Schiller Grounds Care, Inc. strongly warns against, 

rejects  and  disclaims  any  modifications,  add-on 

accessories or product alterations that are not 

designed, developed, tested and approved by Schiller 

Grounds Care, Inc. 's Engineering Department.  Any 

Schiller Grounds Care, Inc. product that is altered, 

modified or changed in any manner not specifically 

authorized after original manufacture–including the 

addition of “after-market” accessories or component 

parts not specifically approved by Schiller Grounds 

Care, Inc. –will result in the Schiller Grounds Care, 

Inc. Warranty being voided.

Any and all liability for personal injury and/or 

property damage caused by any unauthorized 

modifications, add-on accessories or products not 

approved by Schiller Grounds Care, Inc. will be 

considered the responsibility of the individual(s) or 

company designing and/or making such changes.  

Schiller Grounds Care, Inc. will vigorously pursue 

full indemnification and costs from any party 

responsible for such unauthorized post-manufacture 

modifications and/or accessories should personal 

injury and/or property damage result.

 

This symbol means:

 ATTENTION! 

 

BECOME ALERT!

 

 

Your safety and the safety of others is involved.

Signal word definitions

:

The signal words below are used to identify levels 

of hazard seriousness. These words appear in this 

manual and on the safety labels attached to Schiller 

Grounds Care, Inc. machines. For your safety and 

the safety of others, read and follow the information 

given with these signal words and/or the symbol 

shown above.

 

DANGER 

indicates an imminently hazardous 

situation which, if not avoided, 

WILL 

result in death 

or serious injury. 

 

WARNING 

indicates a potentially hazardous 

situation which, if not avoided, 

COULD 

result in 

death or serious injury. 

 

CAUTION

 indicates a potentially hazardous situation 

which, if not avoided, 

MAY 

result in minor or moderate 

injury. It may also be used to alert against unsafe 

practices or property damage.

CAUTION 

used without the safety alert symbol 

indicates a potentially hazardous situation which, if 

not avoided, 

MAY

 result in property damage.

Summary of Contents for Steiner 75-71234A















Reviews: