17
SA-30
SPECIFICATIONS
SPECIFICATIONS
ENGINES:
Construction:
Aluminum block with cast-in cast iron
sleeves. Aluminum head.
Configuration:
4-stroke, vertical shaft, V-twin
cylinder, overhead valve, air-cooled.
DRIVE SYSTEM:
Transaxles:
Dual HydroGear ZT3200 Commercial
Duty Hydrostatic transaxles (10cc Pumps)
Turn Radius:
True Zero
CONTROLS:
Throttle, choke, PTO switch, key switch, operator
present, traction levers (1 per wheel), parking brake,
tine raise/lower, tine down pressure.
GROUND SPEED:
Forward 0-7.4 mph (0-11.9 kph)
Reverse 0-3.5 mph (0-5.6 kph)
BRAKES:
Hydrostat provides dynamic braking
Parking brake: Mechanical paul type in transaxle
TRANSMISSION DRIVE SYSTEM:
Belt from engine to hydrostat input shafts, hydrostatic
drive to wheels and tines via #50 chain.
TURNING RADIUS:
True zero tines up.
Approximately 48" radius tines down.
HYDRAULIC RESERVOIR CAPACITY:
Reservoir 2.75 quarts
Transaxles 2 quarts
Total Capacity 6.75 quarts
POWER STEERING:
Independently controlled drive wheels.
WEIGHT:
554930....
Dry : Approximately 1210 lbs.
Wet: Approximately 1245 lbs.
DRIVE TIRES:
18 X 6.50-8
Pressure: 15 p.s.i. (1.05 kg/cm²)
CASTERS:
13 X 5.00-6
Pressure: 25 p.s.i. (1.75 kg/cm²)
AERATION:
TINES:
3/4" (19mm) formed from .08 in hardened chrome
molybdenum alloy steel. 48 per unit.
PENETRATION DEPTH:
2-5" (50-250 mm) maximum
Adjustable depth set for consistent depth.
AERATION WIDTH:
30" (762mm)
HOLE PATTERN:
3-3/4" X 7" (95mm X 178mm) on center
PRODUCTION:
Up to 92,400 sq. ft./hour
