15
TRUCKLOADER
TRANSPORTATION
NEVER TRANSPORT MACHINE WHILE IT IS RUNNING
TOW BEHIND MACHINE
COUPLING TRUCKLOADING UNIT
1.
Attach nozzle onto draw bar locking clip for
transporting.
2.
Securely attach unit to ball hitch/pintle receiver.
NOTE: Confirm that ball/pintle hitch is secured.
Unit will detach from vehicle if not properly
secured. Refer to specifications page for correct
ball size.
3.
Attach safety chains and connect taillight/brake
wiring harness.
4.
RAISE REAR STABILIZER LEG INTO
UPRIGHT POSITION
5.
Crank up support jack stand and unlatch; rotate
jack until locked in horizontal position.
UNCOUPLING TRUCKLOADER UNIT
Failure to follow uncoupling
instructions can result in unit rollover and serious
personal injury and unit damage.
1.
DROP REAR STABILIZER LEG TO FIRM FLAT
SURFACE.
2.
Secure with spring loaded pin.
3.
Disconnect taillight/brake wiring harness and
safety chains.
4.
Unlatch support jack and rotate to vertical position
and lock.
5.
Disconnect ball hitch/pintle hook receiver on unit.
6.
Crank down support jack until ball hitch/pintle
hook receiver on unit clears ball hitch/pintle hook
on towing vehicle.
7.
Pull vehicle away from unit.
Summary of Contents for LITTLE WONDER monster 8495-06-01
Page 20: ...PARTS SECTION 18 ...
Page 21: ...ASSEMBLY TRUCKLOADER 19 ...
