background image

3

MODEL NUMBER:

 This number appears on 

sales literature, technical manuals and price 
lists.

SERIAL NUMBER: 

This number appears only 

on your machine. It contains the model number 
followed consecutively by the serial number. 
Use this number when ordering parts or seek-
ing warranty information.

NOTICE !!!

Unauthorized modifications may present 

extreme

 

safety hazards to operators and bystanders and 

could also result in product damage. 

Schiller Grounds Care, Inc. strongly warns against, 

rejects and disclaims any modifications, add-on 

accessories or product alterations that are not de-

signed, developed, tested and approved by Schiller 

Grounds Care, Inc. Engineering Department. Any 

Schiller Grounds Care, Inc. product that is altered, 

modified or changed in any manner not specifically 

authorized after original manufacture–including the 

addition of “after-market” accessories or component 

parts not specifically approved by Schiller Grounds 

Care, Inc. will result in the Schiller Grounds Care, 

Inc. Warranty being voided.

Any and all liability for personal injury and/or prop-

erty damage caused by any unauthorized modifica

-

tions, add-on accessories or products not approved 

by Schiller Grounds Care, Inc. will be considered the 

responsibility of the individual(s) or company design-

ing and/or making such changes. Schiller Grounds 

Care, Inc. will vigorously pursue full indemnifica

-

tion and costs from any party responsible for such 

unauthorized post-manufacture modifications and/or 

accessories should personal injury and/or property 

damage result.

 

This symbol means: 

 ATTENTION! 

 

 

BECOME ALERT!

 

Your safety and the safety of others is involved.

Signal word definitions:

The signal words below are used to identify levels of hazard 
seriousness. These words appear in this manual and on the 
safety labels attached to Schiller Grounds Care, Inc. ma-
chines. For your safety and the safety of others, read and 
follow the information given with these signal words and/or 
the symbol shown above.

!

 

DANGER 

indicates a hazardous situation which, if not 

avoided, 

WILL 

result in death or serious injury. 

WARNING

!

 

WARNING 

indicates a hazardous situation which, if not 

avoided, 

COULD 

result in death or serious injury. 

 

!

 

CAUTION

 indicates a hazardous situation which, if not avoid-

ed, 

COULD 

result in minor or moderate injury. It may also be 

used to alert against unsafe practices or property damage.

 

!

 

CAUTION 

used without the safety alert symbol indicates a 

potentially hazardous situation which, if not avoided, 

MAY

 

result in property damage.

SAFETY

CALIFORNIA

Proposition 65 Warning

Diesel engine exhaust and some 
of its constituents are known to the 
State of California to cause cancer, 
birth defects and other reproductive 
harm.

CALIFORNIA

Proposition 65 Warning

Battery posts, terminals, wiring 
insulation, and related accessories 
contain lead and lead compounds, 
chemicals known to the State of 
California to cause cancer and birth 
defects or other reproductive harm. 

WASH HANDS AFTER HANDLING.

WARNING

!

The engine exhaust from 
this product contains 
chemicals known to the 
State of California to 
cause cancer, birth defects 
or other reproductive 
harm.

Summary of Contents for Classen SCHV-18/5.5

















Reviews: