Automatic cable rewinder FT / FTE 350
Fitting and operating instructions
Bedienungsanleitung_FT 350
Seite 17
10.03.2020
Schill GmbH & Co.KG, Bruckstrasse 44, 70734 Fellbach
READY FOR USE
Before commissioning, please conduct an electrical check according to the relevant
applicable national standards.
After connecting the cable reel to the grid and a power connection has been made,
the cable reel should be live.
If this is not the case, please check the thermal safety guards.
LOAD
Please refer to the details on the product label or if the cable is fitted by yourself,
please adhere to the details supplied by DIN EN 50565-1 regarding the
performance of the used cable.
TECHNICAL DATA
Our Cable reels with their robust design are made for operating in factories and
workshops.
The sturdy plastic design, made from high-quality materials, is completely
electrically insulated, corrosion resistant and has very good winding characteristics.
The cable reels come as a standard without connection cable and plug-in device.
•
spiral spring for approx. 30 000 operations
•
Disconnectedly cable locking device with spring detent
•
slip ring depended on versions:
➢
Data slip ring 240V AC / 2 A
➢
high quality flat slip rings 240 / 400V AC - 16A with double contacts
•
versions with thermal safety guards:
➢
fuse installed DIN EN 50565-1
➢
self-retaining thermal guard (56°C±5°C)
•
Cable stopper with segmented gentle clamp 6
– 16 mm
•
mounting fixture for wall or ceiling
•
Ambient temperature: -25°C - +40°C
•
Protection:
IP 20
•
Construction:
protection class II
The stated operating temperatures relates only to the standard cable reel as
described below. Specification for plug in devices can be found within the relevant
standard DIN EN 60390.
Additional information with respect to cable types, spring tensions, power loads and
weights can be found on the product rating plate, in our current product catalogue
and also on our website
