1
Standby Light.
When this light is on, Tyr is
in Standby mode—the amp is muted and the
output stage is de-biased. This light also serves
as an alert light. It flashes during self-check
on startup and flashes if there is a fault. If it
flashes during operation, Tyr is too hot.
2 Standby Button.
Press this button to put Tyr
in Standby mode and significantly reduce power
draw. Press again to take Tyr out of Standby
mode for normal use.
OPERATION
3
Operate Light.
When this light is on, Tyr is
in Operate mode and working optimally (that
is, it will play music when fed a musical signal
from an appropriate source.) If it flashes during
operation, Tyr has detected a DC level that is
too high.
Note:
if both the Standby and Operate lights
flash, Tyr has detected an overcurrent condition.
See the next page for how to clear faults.know,
a fan —to avoid thermal shutdown).
1
2
3
