background image

Mani 2 is simply the most flexible, best-

 

performing phono preamp that you can get, 

anywhere near it’s price. With 4 gain levels, 

 

multiple loading options, and selectable 

 

dual-slope passive low-frequency filter, it’s ready 

for any turntable and any cartridge. Go ahead 

and try it with the uber-priced stuff--we think 

you’ll be surprised. Pleasantly, that is.

INTRODUCTION

WHAT’S IN THE BOX

(1) Mani 2

(1) Wall-Wart

(0) Records

(0) Backstage passes

(0) Prestige

(0) Clingy jeans 

You get the picture. This ain’t fancy, 

 

but it’s definitely the most flexible 

 

phono preamp that can be had for the bucks.

The following is required by the roughly 9,542 

 

government agencies and regulations we have to 

comply with. If you have some common sense, they 

should seem pretty straightforward. In any case, read these 

instructions before proceeding farther, follow all instructions, 

and heed all warnings. Or else! 

1. If you don’t know how to install audio devices, get a 

 

qualified professional to help.

2. Never use this device near water, and clean only with a 

 

dry cloth. 

3. Assure adequate ventilation, do not block any ventilation 

openings, or place near heat sources.

4. Use only the supplied power cord or suitable replacement. 

Route cords away from traffic areas and protect them from 

being pinched. Unplug the cord from the outlet if the apparatus 

is unused for a long period of time.

5. To prevent electric shock, do not use the plug with an 

 

extension cord, receptacle, or outlet unless blades can be 

 

fully inserted.

6. Refer all servicing to qualified service personnel. Service is 

required when the device has been damaged, including cord or 

plug damage, liquid has been spilled or objects have fallen into 

the device, the device has been exposed to rain or moisture, 

does not operate normally, or has been dropped.

WARNING: TO REDUCE THE RISK OF FIRE OR 

 

ELECTRIC SHOCK, DO NOT EXPOSE THIS DEVICE TO 

RAIN OR MOISTURE.

Summary of Contents for MANI 2









Reviews: