Yes, Lyr+ comes with a remote control. And yes, we know it
may seem kinda silly if you’re using Lyr+ on your desk, but
when you’re using it as the focal point of an entire system,
well, maybe it’s not so crazy, right?
1 Input. Press this button to select the input you want to listen
to. If you skip the input, keep pressing—it cycles back around.
2 Tube/MOSFET Mode. When you have a tube installed,
you can switch back and forth between tube and MOSFET
gain modes by pressing this button. If you don’t have a tube
installed, this button won’t do anything.
3 Gain. Toggle between low and high gain with this button.
We recommend turning down the volume before switching to
high gain, as it is significantly higher than low gain.
4 Mute. Press to mute Lyr+—headphone, preamp outs,
everything goes off.
5 Preamp Output Enable/Disable. Press to enable or disable
the preamp outputs.
6 Volume Up/Down. Press the up arrow to turn volume up,
press the down arrow to turn it down. Simple!
REMOTE CONTROL
012345678
115VAC 30W
ASSY IN USA
VOLUME
INPUT
PREOUT
MUTE
GAIN
MODE
1
2
3
4
5
6
