Celsius Operating Manual
Celsius Operating Manual 08/07/20
Page |
9
important to wait before adding new logs until there are only embers and no flames. Watch
out for under pressure in your house, it can occur in both new and old houses because of
the use of an extractor hood or dryer. Under pressure can also be created if the settings are
incorrect on the ventilation system of a house.
Soot
If a lot of soot is formed, it may be because: the temperature in the combustion chamber is
not high enough, because of insufficient air, or the wood is wet. For the fire, use only
firewood stored for a minimum of 12 months in a suitable covered log store and with a
maximum 18% moisture content.
Soot on the glass can be removed with glass cleaner or a piece of damp kitchen cloth
dipped in ash.
Useful information:
Type approval
The type approval is included in this installation and user guide, which specifies the
required distances to combustibles according to legal requirements etc.
Serial number
The serial number is located on the top of the fireplace in the upper left or right hand corner.
Vermiculite
Vermiculite has an insulation value that is 8 times higher than chamotte clay.
This means that high temperatures can be achieved in the combustion chamber, and all the
gases in the wood released and burned off. Over time, vermiculite can become worn, so the
vermiculite tiles should be inspected during the bi-annual service and replaced where
necessary.
