17 Original Declaration of Incorporation of Partly Completed Machinery
Operating Manual 90° ACTUSAFE CMF(S)QT
OM-ENGLISH-Failsafe-QT-16xx-V2.00-2022.03.01
17
Original Declaration of Incorporation of Partly Completed Machinery
According Machinery Directive 2006/42/EC (Annex II, sub. B)
The maufacturer, the company:
SCHIEBEL Antriebstechnik Gesellschaft m.b.H.
Josef-Benc-Gasse 4
A-1230 Vienna
hereby declares that for the partly completed machinery described below:
Electric actuators series:
CM
rCM
exCM
exrCM
the following basic requirements of the Machinery Directive (2006/42/EC) are applied and fulfilled:
Annex I,
articles
1.1.2, 1.1.3, 1.1.5; 1.2.1, 1.2.1, 1.2.2, 1.2.6; 1.3.1, 1.3.2, 1.3.7; 1.5.1;
1.6.3; 1.7.1, 1.7.3, 1.7.4
The following European harmonized standards have been applied:
EN 12100:2010
EN ISO 5210:1996
EN ISO 5211:2001
DIN 3358:1982
The relevant technical documentation for partly completed machinery referred to in Annex VII, Part B has been prepared.
The manufactor commits to electronically submitting the documents for the incomplete machine to the competent national
authority upon request.
For the preparation of the technical documents is authorized:
Head of mechanical Engineering
Schiebel Antriebstechnik Gesellschaft m.b.H.
Josef-Benc-Gasse 4
A-1230 Vienna
This partly completed machinery must not be put into service until the final machinery into which it is to be incorpo-
rated has been declared in conformity with the provisions of the Machinery Directive 2006/42/EC, where appropriate.
The electric actuators as partly completed machinery are in conformity with the relevant regulations of the EU directives:
Directive 2014/30/EU ("’EMV-Directive"’)
Directive 2014/35/EU ("’Low voltage directive"’)
Directive 2014/34/EU ("’ATEX-Directive"’)
for correspondingly marked devices
The corresponding separate EC Declarations of Conformity are valid.
Vienna
,
(location)
13th March 2018
(date)
.........................................................................
(Klaus Schiebel, general manager)
SEC-EINBAUERKLAERUNG-CM-ENGLISH-V1.01-2018.03.13
80
