INTELLIGENT
POWER AMPLIFIER
SCH-09K
0A19C2832
115VAC 450W
+
1 Operation/Fault Light. This light is used to
show the operational status of the Vidar.
Continuous light: normal operation.
Flashing when turned on: the light will flash
for about 10 seconds as Vidar performs its
self-checks. If the amp continues flashing for
over a minute, there is a fault (over-temperature,
over-current, or high DC offset.) See the Clearing
Faults section on the next page.
OPERATION
1
2
Flashing when operating: if the amp mutes
during operation and the light flashes, there’s a
fault. See the Clearing Faults section on the
next page.
2 Heatsinks. Ensure there’s plenty of space to
each side and above the heatsinks, to avoid
over-temperature faults.
2
