13
FAQ
Can I use DAVID X with a digital piano?
How do I make the connections to use a second
speaker or amplifier?
What is the best way to connect a delay or
other external effect to my DAVID X?
Will my condenser mic work with the DAVID X’s
24 V phantom power?
DAVID X’s 6” woofer is not designed for
very high sound pressure levels, but used at
reasonable volume levels, the amp can basically
be employed with any instrument and can also
be used as a compact personal monitor. Send
the signal to the PA via the DI OUT so that
DAVID X also becomes a preamp, letting you
control the sound you are sending out.
The easiest way to connect an external speaker
(or a second active amp) is via the LINE OUT
or DI output.
If you only have one instrument connected
to your amp, you can use the master section
INSERT. For this connection you will need a Y
insert cable. Another way of connecting the
external effect is in series: the effect must be in
the chain just before the signal enters the amp
(guitar —> pedal —> amp).
DAVID X provides way more than the nominal
24 VDC, but, since it is not actually 48 VDC
we cannot legally label it P48. However, most
modern microphones will work just fine. For
more technical information, please read the
following Diary article on the SCHERTLER
website (
https://secure.schertler.com/en_US/
Summary of Contents for DAVID X
Page 2: ...ACOUSTIC X AMPS ...
Page 14: ...ACOUSTIC X AMPS ...
