ART48 - AUXMAST
knob (9.). Don’t forget to deactivate the TB ON button when you have finished speaking
over the talkback!!
Using the headphones section is very simple: Connect your headphones to the HP OUT
(14.) and adjust the VOLUME knob (13.) to a comfortable sound level. You will hear the
music signal from the L/R master independently from the signal level that is determined
by the position of the master faders.
When you depress the PFL to HP (1.) button (red light), the PFL signal will appear on
the headphones, provided that the PFL button is depressed on at least one of the input
channels. This function can be helpful when listening to one input channel exclusively,
or when listening to it before fading it to the main outputs, by having deactivated the
channel (ON / OFF button) or having pushed down the channel’s fader.
The control room section is an additional stereo L/R output (10.) that could drive devices
such as room monitors in a recording studio. Other devices could also receive a stereo
signal from this output, e.g. a subsidiary PA, side fills, a second recording device etc.
Plug the active studio monitors (or the amp to drive passive monitors) into the LEFT and
RIGHT outputs. Set the audio level by turning the VOLUME knob (11.).
The MONO button (12.) will help you listen to a stereo program that has been reproduced
in mono, in order to evaluate its “mono compatibility”.
